Technical Parameters

*input signals:

Analog signal

A(1)analog signals 4-20mA.250 DC input impedance

B.Oto 10mA.500Q DC input impedanceinput impedanca

(2)control switch contact.

* output signal:

(1)the valve position feedback signal:4-20mA.

DC load impedance≤7500

* basic orror:

(1)IQ more turn type electric actuator≤±1%

(2)the standard Angle travel electric device,the extermal regulation quarter-turn electric device≤±1%

* 01~9.9% of dead zone is adjustable, default settingis≤0.5%.

* midway limit, limit set the range of 40%一100%Limit set range of 0% ~0%

* clearance:.

(1)IQ turn more type 1°or less extemal regulation enforcement agencies

(2)type IQ to browse standard valve electric actuator 1°or less

(3)the external regulation Angle of electric actuator 1°or less

(4)standard quarter-turn valves electric actuator 1° or less

* power supply:three-phase three - wire system,380V.AC±10%，50HZ±1%

* protection grade: IP68

* explosive-proof grade:

(1)remote control type this Ann ibl BT4

(2)actuators for the flameproof d IIBt4

* output contact capacity:250V.AC 5A；30V.DC,5A

* environmental conditions of use:

(1) The environment temperature: -25~ +70C

(Flameproof:-20~+60℃)

(2)The relative humidity:5%~98%；Atmos pheric pressure

(3)86~106kpa.

(4)the air medium:no corrosive gas in the ambient air

* anti-interference index:

A, external magnetic field 400A/m 50Hz or less

B, common-mode interference 250v, 50Hz

C, RMS to 1V ac series mode interference signal frequency 50Hz,phase 0~360

D, electrostatic discharge: 4Kv

E, electrical instantaneous pulse: 1000V power supply end；Signal input terminal；500V

F, radio frequency interference: 80~1000MHZ frequency,test voltage 3V/m, 1 m distance

G, 1Kv surge interference